What can best ease transmission bottlenecks? More transfer capacity, DOE says.

utilities transmission capacity

To account for system changes expected during a transmission asset’s lifetime, cost/benefit analyses are typically performed by simulating the electricity system under assumptions about future system conditions. In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript. FERC Chairman Willie Phillips says the new rule requires utilities and grid operators to evaluate the use of many of these technologies, including new wires that carry more electricity. Huang says it sometimes can be difficult to sell utilities his lower-cost super-efficient wires, technology called "reconductoring", for this reason. But when sensors gather information from the wires – about wind, temperature, and wire sag – that data allows utilities to go beyond their conservative standards and safely put more electricity through the wires. These innovations include wires that carry more electricity, software and hardware that can help utilities avoid congestion on lines, and laser sensors, like the ones in Folsom.

The New York Times reported that American hackers from the United States Cyber Command planted malware potentially capable of disrupting the Russian electrical grid. The opinion also limited the voltage of new transmission lines built in New York to 345 kV. A major barrier to wider adoption of merchant transmission is the difficulty in identifying who benefits from the facility so that the beneficiaries pay the toll. Optical fibers can be included in the stranded conductors of a transmission line, in the overhead shield wires. To ensure safe and predictable operation, system components are controlled with generators, https://214rentals.com/garage-construction-in-edmonton-basic-requirements-and-advantages-of-contacting-professionals.html switches, circuit breakers and loads.

  • In 2023, Massachusetts Governor Maura Healey convened a working group to study advanced transmission technologies and make recommendations for their adoption in New England.
  • Whereas static lines will maintain line current even in high heat, lines with DLR will sense the extreme weather and lower current, reducing the risk of the line sagging into vegetation and igniting a fire.
  • The Federal Energy Regulatory Commission (FERC) issued an advanced notice of proposed rulemaking (ANOPR) last June that included a framework for requiring DLR on transmission lines.
  • Supporters of a DLR requirement argue that such a regulation is necessary to secure “just and reasonable” electricity rates — core to FERC’s mandate — because of the cost savings that DLR unlocks for consumers.
  • For example, Utah’s recently passed HB 212 directs utilities to study advanced transmission technologies for their wildfire mitigation potential as part of the utilities’ integrated resource plans.

Experts say innovations called "grid enhancing technologies" or "advanced transmission technologies" can help speed up the renewable transition by making the existing grid and new transmission lines work more efficiently. Sensors can help utilities get real-time data on their power lines, which can allow them to send more renewable electricity through the wires. Even if a utility does not offer a publicly available hosting capacity map, they may be able to consult with new and existing customers on their distribution network’s future capacity potential. Electric utilities working to expand their capacity to meet America's future energy needs use hosting capacity maps to provide an overview of a distribution system's ability to host additional electrical capacity (either generation or load) at specific grid locations. Enabling a more energy-efficient transportation system—including the widespread adoption of electric vehicles (EVs)—will put new and increased demands on our nation's electricity grids.

  • Congestion occurs when there is not enough transmission capacity to deliver the cheapest sources of electricity, and higher-cost resources must be dispatched instead to meet demand.
  • To safely and affordably meet increased electricity demand while decarbonizing the grid, we must build new high-voltage long-distance transmission lines (HVTLs).
  • Amazingly, this machine is 99.95% reliable; the average U.S. customer loses power only twice a year for a total of five hours.
  • Meanwhile, increasingly frequent and severe extreme weather events have battered the grid in recent years, costing consumers billions in extra energy expenses.
  • Through our comprehensive approach—which combined regulatory and industry insights with meticulous project management—they are navigating the complex demands of FERC Order 881 compliance with confidence.
  • On the shorter end, DLR projects take an average of only three months to complete.

We need exponentially more transmission to meet clean energy goals

utilities transmission capacity

As a result, a large amount of potential clean power capacity has been proposed but is gridlocked due to the wait times and costs of connecting to the transmission grid. Coal-fired power plants then operate less often and earn less revenue, which decreases their profitability and reduces the incentive to invest in new coal-fired generation capacity. Energy storage facilities generally use more electricity than they generate and have negative net generation.

The rate of transmission expansion needs to double to support ongoing electrification and reach emission reduction targets. Without them maximum current was typically set as a compromise between understanding of operation conditions and risk minimization. For a long transmission line, these lower losses (and reduced construction cost of a DC line) can offset the cost of the required converter stations https://emergingequity.org/2015/06/26/vladimir-putin-on-the-global-economy-geopolitics-and-russia-europe-relations/?shared=email&msg=fail at each end. Voltages of 69 kV, 115 kV, and 138 kV are often used for subtransmission in North America. Measures to reduce corona losses include larger conductor diameter, hollow cores or conductor bundles.

utilities transmission capacity

The authors thank Patrick Gilman and Gage Reber of the Wind Energy Technologies Office and Paul Spitsen of the Strategic Analysis Team for supporting this work. We purchased data on market prices, load, renewable generation and weather from a commercial vendor; the product is called Velocity Suite, by Hitachi. Second, we screened the fitted supply curves to identify which models represent the data sufficiently well and which models produce large-magnitude residuals for a substantial share of the hours. Further, the Supplementary Information includes analysis on the roles of hot weather and designated storms or grid reliability events on peak transmission value, which were found to be nearly subsumed under the four conditions analyzed here. Links connecting ERCOT to any of its neighbors (SPP, MISO, non-ISO West) register the highest values, driven by exceptionally high values since 2018.

  • Additionally, our work included ongoing monitoring of FERC discussions and emerging orders on dynamic ratings, adjusting the utility’s compliance approach as needed to accommodate new regulatory directions.
  • We provided guidance on updating the FRM to ensure compliance not only with FERC 881, but also with FAC-008 standards.
  • The utility’s proactive approach to integrating new monitoring systems also prepares them for future regulations, such as the anticipated Dynamic Line Ratings Order.
  • This forward-thinking approach ensures the utility remains agile and well-prepared for whatever regulatory shifts may come next.

Major Topics

utilities transmission capacity

This median transmission expansion is 115,000 GW-mi by 2040, doubling today’s grid capacity, with 655 GW of interregional transfer capacity — more than six times the current interregional transfer capacity. The Transmission Needs Study tapped new authority from the Infrastructure Investment and Jobs Act to examine more than 200 possible future scenarios from six analyses. Department of Energy recently released a draft report of the Transmission Needs Study, quantifying the transmission buildout required to bring our country into the future.

Comentários

Deixe um comentário

O seu endereço de e-mail não será publicado. Campos obrigatórios são marcados com *